Installation Method and Selection Skills of Solid Wood Bed Rack

1.Solid wood bed row skeletonThe installation method

1. Connect the bedroom bed side column and the bed foot side column: there are four solid wood side columns, two long ones should be connected with the headboard and two short ones should be connected with the bed foot board. The hole spacing of metal products with embedded parts is screwed into the screw rod, and the remaining hole spacing is inserted into the wooden wedge. Bedroom bedside column, headboard, and bedroom bedside column together. Bedroom bed side column and headboard, interconnected to spell out the bedroom bed. Pay attention to this step, otherwise it will be very inconvenient. Piece together, tighten the nut, connect in time and close tightly.

2. Connect the bedroom bed and the foot of the bed with the bed help: if there is no rich and colorful work experience in this step, it is best for two to three people to operate. First, one end of the bed help is put into the screw rod screwed in advance at the foot of the bed, and the screw is used to hold it a little to prevent loosening, and then one side of the bedroom bed is connected. And so on to connect the other side of the bed. In this step, pay attention to the symmetry of the bed help holes and the distance between the head and tail holes. Generally, the hole spacing is downward, and if the hole is firmly in the middle, it will be installed at will.

2.Solid wood bed row skeletonThe purchase of skills

1. Wooden, commonly known as Ash wood, is also called Fraxinus mandshurica. The key is produced in northeast and north China. The wooden structure is coarse, the lines are straight and glossy, and the strength is great. Ash mandshurica has the characteristics of good ductility, abrasion resistance, water resistance, etc., but it is dry and difficult, and is easy to rise and shrink. The production and processing characteristics of raw materials are good, but tearing should be avoided, the cross section is smooth, and the paint is better than the viscosity.

2.Solid wood bed row skeletonIt has the basic principles of ergonomics, and its convex and concave characteristics make it possible.Solid wood row skeletonThe mattress has stronger ductility, so you can also choose a thinner mattress. Thick software mattress is also very suitable for rack bed, which will reduce the mattress andSolid wood row skeletonBed before the friction vibration, make the body feel more comfortable.

3. LookSolid wood bed row skeletonThe structure of the pork ribs and the structure is inseparable without shaking. There is no noise when pressing by hand. The assembly of the foot screws is smooth. Whether the installation hole spacing is effective or not is in line with the provisions of the engineering drawings. (If it is a pneumatic exhaust skeleton, observe whether it has all normal elevator functions, and the larger horizontal slope rising should be within 45 degrees)