How to choose a high box bed and row skeleton?

At present, the bed on the market is mainly composed of row skeleton, high box bed and low box bed. The appearance of the high box bed and the low box bed is nothing but the height and style of the bed. From a practical point of view, this is nothing more than the size of the storage space.

Skeleton:

The riverbed structure is named because it looks like a rib. Because it needs better load-bearing capacity, it is generally made of curved wood, with thick wood structure, strong hardness, and high grain luster.

High Box Bed:

The bed surface is 20-50cm higher than the ordinary bed, and the bottom of the bed can be used to put things. Such beds are usually not very demanding on the choice of materials. High box bed is divided into row frame high box bed and bed board high box bed, which is a major feature of high box bed.

From the point of view of advantages, both have their own advantages. For example, the row skeleton is very noteworthy for its good breathability, while the high box bed is exciting for its strong storage capacity.

the advantages of row skeleton:

1. The keel frame and other structures have a wide range of stress and can effectively relieve pressure.

2. The gap between the bone strips can make the air between the mattress and the bed box more circulated, which is conducive to the "breathing" of the mattress ".

3. The row skeleton adopts hollow tube, which is light in weight, easy to move and easy to clean.

4. The pneumatic rod used is connected with the bed body, which is more solid and reliable.

The advantages of high box bed:

1. Under the high box bed is a locker, which improves the space utilization and is more practical.

2. Generally speaking, the carrying capacity of the high box bed can reach 350-400kg, and this huge carrying capacity also makes it more durable.

But they also have some big and small shortcomings. For example, one of the main disadvantages of the row frame is that it is relatively expensive, while the big disadvantage of the high box bed is that it is inconvenient to clean and easy to mold.

the shortcomings of the row skeleton:

1. The manufacturing process is relatively complicated and expensive.

2. Most row skeletons are made of curved wood. Although it has good toughness and elasticity, it is not easy to dry or warp.

Disadvantages of high box bed:

1. Although the storage space of the high box bed is large, the inside is sealed. Long-term storage of clothing may have a musty smell, but also easy to breed bacteria and mold. Especially in the humid south, clothes need to be taken out to dry regularly.

2. When opening the high box of the air pressure rod, it is very inconvenient to remove the quilt on the bed. If you don't take the quilt away and open the box directly, the pressure rod will be overloaded and the service life will be shortened.

3. The drawer type high box bed needs enough space to pull out the drawer. If the room is too small, it will be a little embarrassing.

4. The compartments of most high box beds are connected to the bed, which will be very troublesome.

row skeleton procurement skills:

1. From the structural point of view: there should be no abnormal noise when pressing by hand, the assembly of the adjusting foot screw should be stable, and the position of the assembly hole should be reasonable. If it is a pneumatic exhaust skeleton, it is necessary to observe whether its lifting function is normal, and the horizontal inclination of the rise should be within 45 degrees.

2. Look at the load: the weight of a single-row skeleton is generally 20kg. You can stand up and experience it (step on it several times at the same time). Ribs without fracture, good elasticity.

3. Look at the materials: Common materials include poplar, birch, beech and ash. Beech has high hardness, good elasticity, good toughness, wear resistance, and moisture resistance; Qu Wood, also known as Fraxinus mandshurica, has rough wood structure, shiny texture, good elasticity and toughness.

4. See surface treatment: see whether there is veneer treatment on the surface, and the moisture content of wood is not more than 16%.