Some techniques and details of alloy surface coating for row skeleton manufacturers

Skeleton Factory: Technical Specification for Alloy Surface Coating

Alloy surface coating can be said to be an important part of alloy processing, and the quality of alloy coating can greatly affect the value of this product. Therefore, many alloy processing manufacturers now pay more attention to the quality of alloy surface coating technology. In the process of alloy coating, technical specifications are the first thing we need to know. If the technical specifications are not met, it is natural that there will be no better market sales. The technical specifications for alloy surface coating mainly include the following content. Let us take a look at them together.

(1) Personnel engaged in or in contact with alloy surface coating shall undergo professional training, and alloy coating shall not be carried out without training.

(2) In the alloy coating work, it is necessary to conduct a comprehensive inspection of the equipment used to ensure the quality and normal operation of the alloy coating equipment.

(3) When coating the alloy, the surrounding environment needs to meet the relevant technical standards, such as the surrounding ventilation needs to meet the requirements of GB6415.

(4) Alloy coating generally requires two people to cooperate with each other. This is to act as the guardian of the other party as much as possible, to ensure normal work and avoid accidents.

(5) When coating alloys, do not aim the spray gun at other objects, let alone people. Alloy coating spray gun is quite dangerous, the use of the need to pay attention.

(6) After the alloy coating work is completed, clean the workplace in time to ensure the cleanliness of the surrounding environment.

It can be said that every manufacturer who wants to improve the quality of alloy surface coating products should have a deep understanding of the technical specifications of alloy coating, and our manufacturers also strictly abide by the technical specifications in the process of alloy coating, so our alloy coating products still have a relatively high evaluation in the market.

Ride skeleton manufacturer: some details of alloy surface coating

(1) To judge the gloss of the alloy coating, we do not recommend the use of a gloss meter, because in most cases, the use of a gloss meter to analyze the surface gloss is relatively one-sided, and the error is relatively large, so it is more appropriate to use visual inspection.

(2) Many people may also find that the coating may be rubbed off when the alloy surface is coated. A better way to solve this problem is to add a transparent coating on the surface of the alloy coating.

(3) The alloy surface coating pays more attention to the uniformity of the coating. When coating, try to pay attention to a coating, and use the same type and batch of coatings as much as possible to minimize the difference in coating uniformity and ensure the same surface.

(4) The recovery of alloy powder is also very particular, and there may be differences in the composition between the recovered powder and the new powder. Therefore, it is recommended that the ratio of the recovered powder to the new powder is at least 1:4 for recovery.

The platoon skeleton manufacturer has been introduced here today. Thank you for watching.