Rack maker: Rack bed installation tutorial

The rack bed conforms to the principle of human mechanics, has better air permeability than the wooden bed board, and has a wider force range. How to install the rack bed? Let us follow the main program we can install and send to view the installation steps of the rack bed.

Rack Bed Installation-Preparation:

The relevant tools must be prepared in advance before installing the skeleton bed. In fact, the installation of this row of skeleton beds is not difficult, so you only need a screwdriver, a simple wrench and the hardware accessories of this row of skeletons. Before installing the row frame, we need to install the main structure of the bed. One step is to connect the bedside column with the bedside column at the head of the bed. Generally speaking, there are four solid wood side posts, of which two long side posts need to be combined with our headboard and two short side posts need to be connected with the headboard. Then, screw the screw in the hole of the embedded metal piece, and insert the wooden wedge in the remaining space.

Rack bed installation-splicing:

After connecting the frame during the installation of the rack bed, it is time to splice all the important parts of the bed. The first step in the installation of the rack bed is to splice the head column, the head column and the bed board. First, splice the headboard with the side column of the headboard to form the headboard. It should be noted here that the headboard should not be installed upside down. After the splicing is completed, fix it with screws. Generally speaking, if the connection is in place, it looks very tight. Then in the second step of installing the skeleton bed, the skeleton bed is fixed with crescent-shaped metal fasteners, and the skeleton bed is fastened with a wrench.

Rack frame bed installation-splicing precautions:

Attention should be paid when installing the above-mentioned rack bed. It is good to place the bed body parts on the packaging board during installation to effectively prevent the rack bed from scratching the floor during installation. After the assembly is completed, stand against one side, taking care not to scratch the wall when standing. The above method of installing the head of the bed is the same as that of the head of the bed. The third step in installing this row of skeleton beds is to install the end of this row of skeleton beds.

Rack Mount-Connection:

After splicing the head and the end of the bed, the fourth step in installing this row of skeleton beds is to connect the head and the end of the bed with the top of the bed. I would like to remind you that if you are not familiar with it, invite friends to do it together. First, we need to put one end of the head of the bed into the screw that has been screwed in advance, so that we can fix it with screws, and then connect the other end. It should be noted here that the position of the hole at the head of the bed should be symmetrical with the head of the bed. In general, the holes of the ordinary rack bed are downward. If the hole is in the middle, you can install it at will.

rack bed installation:

After completing all the installation steps of the rack bed above, you need to check and tighten all the screws and other hardware fasteners in the rack bed. And install the reinforcement, this step is very simple. Move the screwdriver. The installation of the rack bed is to disassemble the packaging bag of the rack, connect it with the four corners of the bed, and fasten it.