Solid wood row skeleton installation method is what?

The characteristic of the solid wood ribs frame bed is that the force range of the bed is much wider. According to the principle of mechanical dispersion, the ribs will disperse the gravity of people and make the ribs evenly stressed. so what is the installation method of solid wood row skeleton?

solid wood row skeleton installation method is what?

1. Check the accessories and prepare the installation tools. Generally speaking, the installation can be completed by using a Phillips screwdriver and a simple wrench.

2. There are four solid wood lateral columns connecting the bedside column and the bedside column. Two long posts shall be connected to the headboard and two short posts shall be connected to the backboard. The hole of the embedded metal part is screwed into the screw, and the remaining hole is inserted into the wedge.

3. The headboard and the bedside table are spliced together, and the bedside table and the headboard are connected to form the bedside.

4. Connect the bed head and the bed end with the bed help. This step is operated by two or three people. First, insert one end of the bed surface into the screw screwed at the end of the bed in advance, fix it with screws to prevent loosening, then connect one side of the bed surface, and so on, connect the other side of the bed surface. In this step, note that the hole position on the bed side should be symmetrical to the head and tail. Generally, the position of the hole is downward. If the hole is in the middle, just load it.

5. Tighten all the screws, install the angle iron reinforcement, and tighten the screws with a Phillips screwdriver.

6. When you disassemble the skeleton, you can see that there are six supporting legs. The two intermediate sheets are joined together with four angle iron reinforcements that fit into the four corners of the bed.

solid wood row skeleton: what is the difference between skeleton and bed board?

1. Pneumatic rods are used for the connection between the skeleton and the bed, while the bed board and the bed need to be placed flat or fixed with nails.

2. The appearance of the skeleton is streamlined and conforms to the requirements of ergonomics. The bed board is flat, which is not as comfortable as the row skeleton.

3. The row frame has high material requirements and high cost, and the bed board only needs ordinary wood.

4. The row frame is a hollow design with good air permeability, especially the mattress, which can prevent the mattress from being damp and moldy to produce bacteria, while the bed board is not breathable and has relatively poor air permeability.

what are the characteristics of solid wood row skeleton?

1, in line with the mechanical principle of human mechanics, the row skeleton has a certain elasticity. The elasticity of the bed and the elasticity of the mattress make people more comfortable lying on the bed, which is beneficial to people's health.

2. The air permeability of the row skeleton is better than that of the wooden bed, because it is composed of slats, leaving gaps between slats to increase air mobility, thus improving the air permeability of the bed, preventing the breeding of bacteria, and being suitable for the hot and humid home environment.

3, the force range is wide, a row of skeleton evenly dispersed force, each row of skeleton can bear more than 120kg of force. Because it can be evenly stressed, the human spine will not be suspended, and the quality of sleep will be improved.

4. The row skeleton has a certain radian under normal circumstances, and it can bear 350-500kg during normal use, which is larger than the board.

5. When choosing a mattress, there are certain requirements for the thickness of the mattress. Generally, it is necessary to choose a thicker mattress, and a mattress with a spring is very good. Now there are many materials to choose from, such as bamboo fiber mattress, palm mattress, jute mattress.

6. In terms of price, the rack bed is cheaper than the high box bed.